Q-San

Q-San

QAC Sanitizer

DESCRIPTION

Concentrate liquid neutral disinfectant for brewery, beverage, dairy, poultry, seafood and meat processing industry.

APPLICATION

Q-San is suitable for using with chrome nickel steel, iron, copper, tinned, galvanized iron, plastic (PE, PP, PVC, etc.)

Prior to apply Q-San, plant and equipments have to be cleaned properly otherwise gemicidal effective will be reduced.

For Non-direct food contact surface ; wall, floor, ceiling 0.1-0.2% of Q-San is recommended. (No post rinse is required)

In case of application for Boots cleaning bath 0.2-0.4% and for hand sanitizing 0.1% of Q-San is recommend respectively.

For Direct food contact surface ; tank, pipe, process table, cutting board and other process equipments, etc. 0.05-0.10% of Q-San is recommended via foam application and left contact time for 20 minutes to 2 hour at room temperature.

Non-rinse application can be applied by using product at not more than 200 ppm. active quaternary ammonium compound.

For Fogging application 0.5-0.6% Q-San is recommended via fogging system (NTM-05)

 PRODUCT BENEFITS

  • Effective to broad micro-organism (see table 1)
  • Non corrosion for all materials.
  • Fast germicidal effect to most germs.
  • Suitable for foam sanitize application.
  • Non rinse sanitizer can be applied for 200 ppm. active quaternary ammonium compound.
Q-San M

QAC Sanitizer

DESCRIPTION

Liquid neutral sanitizer for food industries ; brewery, beverage, dairy, poultry, seafood and meat processing industry.

APPLICATION

Q-San M is suitable for all kind of materials such as chrome nickel steel, iron, copper, tinned, galvanized iron, plastic (PE, PP, PVC, etc.)

Prior to apply Q-San M, plant and equipments have to be cleaned properly otherwise gemicidal effective will be reduced.

For Non-direct food contact surface ; wall, floor, ceiling 0.2-0.4% w/w of Q-San M is recommended. For Boots cleaning bath 0.4-0.8 % w/w and for hand sanitizing

0.2 % w/w of Q-San M is suitable. (No post rinse is required)

For Direct food contact surface ; tank, pipe, process table, cutting board and other process equipments, etc.
0.1-0.2 % w/w of Q-San M is recommended via foam application and left contact time for 10-15 minutes or longer at room temperature.

Non-rinse application can be applied by using product at not more than 200 ppm. active quaternary ammonium compound.

PRODUCT BENEFITS

  • Effective to broad micro-organism (see table 1)
  • Non corrosion for all materials.
  • Fast germicidal effect to most germs.
  • Suitable for foam sanitize application.
  • Non rinse sanitizer can be applied for 200 ppm. active quaternary ammonium compound.
  • Easily proportional dosage throgh sprayers or injector meter.
Q-San L

Non-Rinse liquid neutral sanitizer

DESCRIPTION

Liquid neutral sanitizer for food industries ; brewery, beverage, dairy, poultry, seafood and meat processing industry.

APPLICATION

Q-San L is suitable for all kind of material such as chrome nickel steel, iron, copper, tinned, galvanized iron, plastic (PE, PP, PVC, etc.)

Prior to apply Q-San L, plant and equipments has to be cleaned properly otherwise gemicidal effective will be reduced.

For Non-direct food contact surface ; wall, floor, ceiling 0.5-1.0% of Q-San L is recommended. (No post rinse is required)

For Direct food contact surface ; tank, pipe, process table, cutting board and other process equipments, etc. 0.2-0.4% of Q-San L is recommended via foam application and left contact time for 20 minutes to 2 hour at room temperature.

Non-rinse application can be applied by using product at not more than 200 ppm. active quaternary ammonium compound.

PRODUCT BENEFITS

  • Effective to broad micro-organism (see table 1)
  • Non corrosion for all materials.
  • Fast germicidal effect to most germs.
  • Suitable for foam sanitize application.
  • Non rinse sanitizer can be applied for 200 ppm. active quaternary ammonium compound.